Great How To Tips On Repairing Roof Leaks

Great How To Tips On Repairing Roof Leaks

Fixing a roof leak is a task that may be accomplished by you as the homeowner, no experience is really required. However, the knowledge of how to get it done properly is certainly necessary. The great news is that you can easily get that information online. All it takes is a simple quick online search and you’ll get tons of content that will show you how to locate and repair all kinds of roof leaks. Fixing a roof leak takes but a few minutes to complete.

It is of utmost importance to address a concern that many homeowners have regarding roof leaks. Even though your roof may not have been damaged by any external cause it may be worn out and old. Sometimes rain water may seep through causing unexpected water damage to the ceiling, walls, carpet, as well as other items inside your home.  Here’s the light at the end of the tunnel. Those types of damages are covered by conventional homeowners HO-3 policy.

Now, let’s get back to repairing a roof leak. If you notice a growing water stain on your ceiling or coming down a wall than most likely the problem is a roof leak. Finding the crack where the water may be seeping from is the difficult part. This article will provide you simple but great tricks for uncovering and fixing the most common roof leaks.

Now, if for some unexpected weird reason you’re experiencing a roof leak than you need to repair it right away. Whether or not you’re planning to get a new roof in a near future, getting it fixed is essential to avoid further unnecessary damages. The reason being is that even small leaks can turn into big issues within a short period of time. Issues like damaged insulation, mold growth, sheathing and rotted framing. Dealing with the simple leak coming from the roof in a timely manner will obviously minimize the damage and its subsequent repairs.

How to Repair a Leaking Roof

Small roof leaks can be repaired without the need of hiring a professional. The steps outlined below will assist you in to uncover problems and fix wooden shake, shingle and flat roofs. It is extremely important to be safe and take all necessary precautions when working on your roof, especially avoid working on a wet roof.

Roll Roofing

  1. Inspect the roof looking for blisters or cracks in the roofing material.
  2. Repair any and all found blisters. Make a straight cut right in the middle of the blister using an knife, however, make sure to not cut through the sound roofing felt below.
    • It is necessary to get any water that may be inside the blister and completely dry it.
  1. Apply a good sum of roofing cement underneath the loose roofing material and put pressure on it until dried.
  2. Place roofing nails around the repaired blister.
  3. Cover up the entire area including the nail heads with roofing cement.

Fixing Shingles

  1. Inspect the area where the leak is coming from looking for possible damage. It may be more simple to uncover a damage on a flat roof. However, it is also possible for leaks to be seeping through from a good distance from where the roof damage is found.
    • In case your roof may be slanted, make sure to inspect all areas that are higher than where the leak penetrates into the house.
    • If your property has an attic, use a flashlight to inspect it looking for any black marks, water stains or mold.
    • Spray water across the entire roof and have someone in the house to let you know when it starts to leak.
  1. Inspect the roof looking for curled, missing or damaged shingles around the area where the leak is coming from. Also, make sure to be on the lookout  for any roofing tacks sticking out.
  2. Restore or if needed replace shingles that are curled back. Using heat will make it easier to straighten those curled back  shingles, however be mindful as any excess heat can ruin the shingle.
  3. If the shingle has been restored, glue it back using a good quantity of asphalt roof compound or cement along the edges of the shingle.
  4. Replace unrepairable shingles. If feasible, replacing the shingle is highly recommended. Especially if the shingle breaks, crumbles or even if it keeps lifting up with very little effort.
    • Detach the damaged shingle by lifting the edges and removing the nails.
    • Clean the area beneath it by scraping off any leftover compound or cement.
    • Utilize a sharp knife to slightly round off the back corners of the shingle you will be using to replace the damaged one.
    • Place the new shingle in place and nail it with one and a quarter inch galvanized nails on each corner, then use roof cement to cover up the nail heads.

Damaged Shakes

  1. Use a chisel and hammer to split any damaged shakes.
  2. Remove the pieces by sliding the chisel under the damaged shake.
  3. If any nail cannot be taken out, utilize a hacksaw to cut  off the piece sticking out. To avoid damaging a good shake, work around the nail that you may not be able to remove or cut off.
  4. Utilizing a fine-toothed saw cut the new shake about 3/8 inches shorter than the old one.
  5. Place the new shake in and nail it down with using 2 galvanized nails.
    • Try cutting notches into the shake using a coping saw to fit nails that you were not able cut off.
    • Use caulking compound as a sealer after setting the heads with a nail set.

Comments are closed.